CCIE (R&S)
0 STUDENTS ENROLLED
CCIE (R&S) Course Content:
1.Implement Layer 2 Technologies
- Implement Spanning Tree Protocol (STP)
- Loop guard
- Root guard
- Bridge protocol data unit (BPDU) guard
- Storm control
- Unicast flooding
- Port roles, failure propagation, and loop guard operation
- Implement VLAN and VLAN Trunking Protocol (VTP)
- Implement trunk and trunk protocols, and load-balance
- Implement Ethernet technologies
- Speed and duplex
- Ethernet, Fast Ethernet, and Gigabit Ethernet
- PPP over Ethernet (PPPoE)
- Implement Switched Port Analyzer (SPAN), (RSPAN)
2.Implement Frame Relay
- Local Management Interface (LMI)
- Traffic shaping
- Full mesh
- Hub and spoke
- Discard eligible (DE)
- Implement High-Level Data Link Control (HDLC) and PPP
3.Implement IPv4
- Implement IP version 4 (IPv4, subnetting, & VLSM
- Implement IPv4 tunneling and GRE
- Implement IPv4 RIP version 2 (RIPv2)
- Implement IPv4 Open Shortest Path First (OSPF)
- Standard OSPF areas
- Stub area
- Totally stubby area
- Not-so-stubby-area (NSSA)
- Totally NSSA
- on a point-to-point and on a multi-access network
- OSPF graceful restart
- Implement IPv4 EIGRP
- Best path
- Loop-free paths
- EIGRP operations when alternate loop-free paths
- Manual summarization and auto summarization
- EIGRP stubs
- Implement IPv4 Border Gateway Protocol (BGP)
- Next hop
- Peering
- IBGP and EBGP Implement policy routing
- Implement PfR and Cisco Optimized Edge Routing
- Implement filtering, route redistribution, summarization, features
4.Implement IPv6
- Implement IP version 6 (IPv6) addressing
- Implement IPv6 neighbor discovery
- Implement basic IPv6 functionality protocols
- Implement tunnelling techniques
- Implement OSPF version 3 (OSPFv3)
- Implement EIGRP version 6 (EIGRPv6)
- Implement filtering and route redistribution
5.Implement MPLS Layer 3 VPNs
- Implement Multiprotocol Label Switching (MPLS)
- Implement Layer 3 VPNs on PE, provider, and CE routers
- Implement VRF and Multi-VRF Customer Edge (VRF-Lite)
6.Implement IP Multicast
- Implement Protocol Independent Multicast (PIM) sparse mode
- Implement Multicast Source Discovery Protocol (MSDP)
- Implement interdomain multicast routing
- Implement PIM Auto-RP, unicast rendezvous point (RP), and BSR
- Implement multicast tools, features, and source-specific multicast
- Implement IPv6 multicast, PIM, and related MLD
7.Implement Network Security
- Implement access lists
- Implement Zone Based Firewall
- Implement Unicast Reverse Path Forwarding (uRPF)
- Implement IP Source Guard
- Implement authentication, authorization, and accounting (AAA)
- Implement Control Plane Policing (CoPP)
- Implement Cisco IOS Firewall
- Implement Cisco IOS Intrusion Prevention System (IPS)
- Implement Secure Shell (SSH)
- Implement 802.1x
- Implement NAT
- Implement routing protocol authentication
- Implement device access control
- Implement security features
8.Implement Network Services
- Implement Hot Standby Router Protocol (HSRP)
- Implement Gateway Load Balancing Protocol (GLBP)
- Implement Virtual Router Redundancy Protocol (VRRP)
- Implement Network Time Protocol (NTP)
- Implement DHCP
- Implement Web Cache Communication Protocol (WCCP)
9.Implement Quality of Service (QoS)
- Implement Modular QoS CLI (MQC)
- Network-Based Application Recognition (NBAR)
- CBWFQ, MDRR, and LLQ
- Classification
- Policing
- Shaping
- Marking
- Weighted random early detection (WRED) and RED
- Compression
- Implement Layer 2 QoS: WRR, SRR, and policies
- Implement link fragmentation and interleaving (LFI) for Frame Relay
- Implement generic traffic shaping
- Implement Resource Reservation Protocol (RSVP)
- Implement Cisco AutoQoS
10.Troubleshoot a Network
- Troubleshoot complex Layer 2 network issues
- Troubleshoot complex Layer 3 network issues
- Troubleshoot a network in response to application problems
- Troubleshoot network services
- Troubleshoot network security
11.Optimize the Network
- Implement syslog and local logging
- Implement IP Service Level Agreement SLA
- Implement Net Flow
- Implement SPAN, RSPAN, and router IP traffic export (RITE)
- Implement Simple Network Management Protocol (SNMP)
- Implement Cisco IOS Embedded Event Manager (EEM)
- Implement Remote Monitoring (RMON)
- Implement FTP
- Implement TFTP
- Implement TFTP server on router
- Implement Secure Copy Protocol (SCP)
- Implement HTTP and HTTPS
- Implement Telnet
Course Reviews
No Reviews found for this course.
Write a Review